ANCHORSANA FIX
Quick compound, lime and aluminate based, for fixings and anchors
Cod: INT.0018
Componente: 1
Aspect: Praf
Premixed based on hydraulic lime, special sulfur aluminate binders, water retainers, shrinkage compensators and reducers of the water/binder ratio, used for fixing and anchoring, in masonry, connectors, inserts, bars, brackets, grouting of the joints, tacking of lesions. It is a product with accelerated setting and hardening, with setting start at 30 ', end setting at 60' and development of mechanical strength already after 90 'of curing. Particularly recommended in the restoration of period and monumental buildings.
Familia
Cod vamal
Linee di appartenenza
Certificǎri obținute şi Dispoziții
EN 998-1
Mortare pentru tencuieli interne si externe- Mortar de uz general (GP)
EN 998-2
Mortare de zidărie - Mortar de zidărie de uz general (G)
M20
EN 998-2
Caracteristici generale
Pot life: 15 min
Amestecaţi cu apă: 23 - 30 %
Conservare: 6 luni
Utilizaţi produsul cu mănuşi de protecţie
Temperatura de utilizare: +5 / +30 °C
Neinflamabil
Diametrul maxim al agregatului: 0.5 mm
Greutate specifică: 1.97 kg/dm³
Specificații tehnice
Întărire la atingere
30 min
Rezistenţa la flexiune la 01 zi
> 4 MPa
Rezistenţa la comprimare la 28 de zile
> 20 MPa
Forţa de aderenţă
> 1.0 N/mm²
pH
> 12 _
Rezistența la compresiune după 1,5 ore
> 4 MPa
Rezistență la compresiune la 01 de zile
> 13 MPa
Reacție la foc
A1 _
Modul elastic static
11000 N/mm²
Întărire completă
60 min
Rezistenţa la flexiune la 28 de zile
> 6 MPa
Permeabilitate la vaporii de apă
≤ 35 _
Absorbție capilară
< 0.50 kg•h^0.5/m²
Culori disponibile
- Gri deschis
Ambalaje şi dimensiuni
- Paletă: 50 x (Sac 25 kg)
- Sac 25 kg
Caracteristici
The particularly fine constituent materials allow adequate anchoring even in the presence of a small space between hole and connectors. By mixing ANCHORSANA FIX with different water contents, the product passes from thixotropic consistencies (23% water) to fluid gel consistencies (30% water), allowing any type of anchoring, from overhead to inclinations towards the bass. The product does not contain resins and solvents and can also be used indoors, subject to the usual precautions necessary when handling materials based on alkaline and irritating powders such as lime (use suitable personal protective equipment, such as gloves and protective goggles).
Consumuri
Approximately 1.6 kg of ANCHORSANA FIX for each cubic decimeter of volume to be filled.
Domenii de utilizare
Fixing and anchoring, in masonry bodies, of rigid connectors, jib connectors, inserts, bars with improved adherence, anchors. It develops great adhesion on materials of different nature: metal, fiberglass, basalt.
Pregǎtirea suporturilor
Blow with compressed air and forced suction of the housing holes. The application surfaces must be clean, free of dirt, moving, crumbly and incoherent parts, dust, etc., suitably saturated with water until reaching the condition of "saturated with dry surface".
Mod de utilizare
Pour about 2/3 of the mixing water into the mixer; gradually add ANCHORSANA FIX and the water still required, continuing to mix, until a homogeneous, lump-free mixture of the desired consistency is obtained. Apply with a trowel or by casting. The mixing water indicatively required is equal to 23% by weight for thixotropic doughs, and to 30% by weight for doughs with a plastic-fluid consistency.
Metode de aplicare
- Mistrie
- Turnare
Curǎțarea instrumentelor
- Apă
Suporturi permise
- Beton
- Cărămizi
- Mortare cimentoase din var si mixte
- Şape de substrat
- Tencuieli
- Tuf
- Ziduri din cărămidă cu goluri
- Ziduri din piatră
- Ziduri mixte
Contactați-ne imediat
Vuoi saperne di più sui nostri prodotti?
Fişa tehnicǎ [ITA]
Fişa tehnicǎ [ENG]
