SYNTECH GROUT EP

Castable two-component epoxy mortar for restorations and anchoring

Cod: SYN.0366

Componente: 2

Aspect: Lichid

SYNTECH GROUT EP is a solvent-free fluid epoxy mortar consisting of epoxy resins, special additives and selected aggregates of varying granulometry to restore structures in reinforced concrete, concrete paving, to create rigid joints, high-strength anchors and bar grouting. It is easily applied via simple pouring, to create layers of up to 5 mm in thickness.

Linee di appartenenza

Certificǎri obținute şi Dispoziții

Produse și sisteme pentru protecția și repararea structurilor din beton - Reparații structurale și nestructurale (clasa R4)

EN 1504-3

Produse și sisteme pentru protecția și repararea structurilor din beton - Reparații structurale și nestructurale (clasa R4)

Caracteristici generale

conservare

Conservare: 12 luni

fără-solvenţi

Fără solvenţi

grosimea-maximă-recomandată

Grosimea maximă recomandată: 5 mm

raport-de-amestec

Raport de amestec: 10 : 2.1 _

temperatura-de-utilizare

Temperatura de utilizare: +5 / + 35 °C

utilizaţi-produsul-cu-mănuşi-de-protecţie

Utilizaţi produsul cu mănuşi de protecţie

utilizaţi-produsul-cu-ochelari-de-protecţie

Utilizaţi produsul cu ochelari de protecţie

Specificații tehnice

4.1 MPa

Absorbție capilară

0.01

Conţinut de cloruri

0.01 %

Întărire la atingere

2 h

Modul elastic static

20 GPa

Rezistenţa la alunecare

CLASS I _

Rezistenţa la comprimare

> 45 N/mm²

Rezistența la scoaterea barelor de oțel cu aderență îmbunătățită

0.32 mm

Trecere pietonală

4 h

Culori disponibile

- Gri deschis

Ambalaje şi dimensiuni

- Găleată 10 kg [A]

- Găleată 2.1 kg [B]

- Kit: 1 Găleată 10 kg [A] + 1 Găleată 2.1 kg [B]

Caracteristici

SYNTECH GROUT EP is specifically formulated to ensure tenacious adhesion to the substrate. It is characterised by its high mechanical resistance, friction and abrasion resistance. It is anti-shrinkage and effectively resists industrial atmospheres, not being at risk from the effects of atmospheric agents and aggressive chemicals. Being solvent-free, it is safe for users and the environment, also being applicable in indoor environments in progress. It is easily applied by pouring and has a good workability time. An anti-slip finish is easily achieved by applying a dusting of quartz.
Some important characteristics include:
- Hardened prism density (UNI EN 12190): 2.1 kilograms/litre
- Shake table workability (UNI EN 13395/1): 280 mm
- Touch dry: 2 hours at 20° C – 4 hours at 10° C
- Passable with trolleys: after 4 hours at 20° C – after 8 hours at 10° C

Consumuri

Approximately 2 kilograms/square metre of SYNTECH GROUT EP for each millimetre of thickness to be achieved.

Domenii de utilizare

SYNTECH GROUT EP is used to restore reinforced concrete and cement structures. Thanks to its ease of use, it is ideal for restoration work on deteriorated flooring such as the regularisation of uneven areas where lumps, heavy objects falling or the friction of moving vehicles has caused gaps (especially near the contraction joints), erosion or the loss of the wear layer. Thanks to its mechanical characteristics, it is ideal for high-strength anchor castings, rebar grouting, metal pins and studs, both indoors and outdoors.

Pregǎtirea suporturilor

The surfaces to be treated must be clean, free from oil, grease, efflorescence, dust and crumbly parts that could affect adhesion. Slight moisture in the surface is tolerated so long as there are no stagnations of water that must be removed. In the case of application at low temperatures, the area must be insulated and protected with mobile guards to create heated environments. Do not apply with ambient or substrate temperatures below 5° C. Vertically cut the perimeter of the areas to be repaired. If applying SYNTECH GROUT EP for repairs with significant thickness, attach a suitable reinforcing metal mesh to the surface with nails for concrete or with dowel bars secured with epoxy adhesive in specific holes.

Mod de utilizare

Mix the contents of the drums before use. Add components A and B in the special container and slowly mix with a whisk for at least 3–4 minutes, until a homogeneous mixture is obtained, free from lumps and air bubbles. It is possible to withdraw partial quantities from the packages but only by carefully weighing the two components to exactly respect the proportions of the two components stated on the packaging so as to prevent any errors in the mixing ratio that would cause incorrect hardening. Immediately after mixing, apply SYNTECH GROUT EP for casting, preparing – where necessary – a formwork that is suitably disarmed with polyethylene sheets to contain the jet. If metal elements are used to channel the casting, they must also be protected with polyethylene sheeting or silicone release agent to prevent the adhesion of the product. For horizontal grouting or to fill cracks or cavities, be sure to confine the mortar then pour the product, taking care to slightly vibrate to promote air release. On horizontal surfaces, use a toothed trowel to help with the distribution of SYNTECH GROUT EP. When repairing concrete floors, pass a roller to eliminate any air that may be incorporated during mixing. In the bar grouting or other metal elements, slowly and repeatedly insert and extract an iron wire into the cast section in order to facilitate the release of air. To clean tools, use special epoxy thinner. Once hardened, SYNTECH GROUT EP can only be removed by mechanical means. To make thicknesses greater than 5 mm, it is recommended to pour several times, with intervals of at least 4 hours.

Metode de aplicare

- Turnare

Curǎțarea instrumentelor

- Diluant pentru răşini

Suporturi permise

- Beton

Contactați-ne imediat

Vuoi saperne di più sui nostri prodotti?

Atenție, introduceți datele în mod corect
Atenție! Introduceți adresa de email corectǎ
Atenție, introduceți datele în mod corect

Prin trimiterea, accept acceptarea declarației de confidențialitate

Atenție, introduceți datele în mod corect

Abonare la buletine informative

Trimteți mai departe

Produse în evidențǎ

  • Protech Balcony
  • Pro Seal
  • Syntech H.A.G.